Samsung Washer Error Codes: Full List & How to Fix Each One

Imagine you are halfway through a load of laundry, and suddenly your Samsung washer stops. A strange code like 4C, 5C, or UE flashes on the display, leaving you wondering what went wrong. It can feel frustrating, but in most cases, that code isn’t telling you your washer is ruined it’s simply pointing to a specific problem that needs attention.

This guide explains the most common Samsung washer error codes, what each one means, why it happens, and how to fix it. Whether it’s a water supply issue, a drain problem, or a door lock error, you’ll find simple troubleshooting steps to help you get your washer running again and know when it’s time to call a professional.

Samsung Washer Error Codes List 

If your Samsung washer stops during a cycle and shows an error code, don’t panic. These codes are designed to tell you what part of the washer needs attention. In many cases, the problem is something simple, like a blocked drain, low water pressure, or an unbalanced load. Use the quick reference chart below to identify your Samsung washer error code, understand what it means, and know the first step to take.

Error Code	Meaning	Common Cause	Recommended Fix
4C / 4E	Water Supply Error	Water tap is off, low water pressure, or clogged inlet filter	Make sure the water supply is on and clean the inlet screens.
5C / 5E / SC	Drain Error	Clogged drain filter, blocked hose, or faulty drain pump	Clean the drain filter and check the drain hose for blockages.
1C / 1E	Water Level Sensor Error	Faulty pressure sensor or loose wiring	Restart the washer. If the code returns, the sensor may need inspection.
LC / LE / LC1	Water Leak Error	Water leak inside the washer or damaged hose	Inspect hoses and connections for leaks and replace damaged parts if needed.
OC / OE	Overflow Error	Too much water entering the washer or faulty water level sensor	Turn off the washer and check the water inlet valve and sensor.
dC / DC	Door Open Error	Door isn’t fully closed or something is blocking it	Close the door securely and remove anything preventing it from locking.
dE / DE	Door Lock Error	Faulty door latch or lock assembly	Check the door latch for damage. Replace it if it won’t lock properly.
DC1 / DDC	Add Door Error	Add Door isn’t closed correctly	Close the Add Door firmly and restart the cycle.
UE / UB / UR	Unbalanced Load Error	Clothes are unevenly distributed or the washer is overloaded	Redistribute the laundry evenly and avoid overloading the drum.
3C / 3E	Motor Error	Motor, wiring, or control board issue	Restart the washer. If the error continues, professional repair is recommended.
HE / HC	Heating Error	Heating element or temperature control problem	Stop using the washer and have the heating system inspected.
TE / TC	Temperature Sensor Error	Faulty thermistor or wiring issue	The temperature sensor may need testing or replacement.
AE / AC	Communication Error	Control boards are not communicating properly	Reset the washer. Persistent errors usually require professional diagnosis.
BE / BC	Button Error	A control panel button is stuck or malfunctioning	Press each button to check for sticking. Clean or replace the control panel if needed.
9C	Voltage Error	Power supply is too high or too low	Check your home’s power supply and avoid using damaged extension cords.
PC	Clutch Position Error	Clutch or actuator problem	The clutch assembly should be inspected and repaired by a technician.

Tip: If your Samsung washing machine error code disappears after restarting but comes back during the next cycle, the problem hasn’t been resolved. Use the sections below to learn what each code means, what causes it, and the best way to fix it before it leads to a bigger repair.

Samsung Washer Error Codes Explained

When your Samsung washer displays an error code, it’s telling you exactly where to start looking for the problem. Instead of guessing what’s wrong, these built-in Samsung washer error codes help narrow it down to a specific system, such as the water supply, drain pump, door lock, motor, or electrical components. Understanding what each code means can save you time, prevent unnecessary repairs, and help you decide whether it’s a quick DIY fix or a job for a professional.

To make troubleshooting easier, we’ve grouped the most common Samsung washing machine error codes by the type of problem they represent. This way, you can quickly find the code on your display, understand what caused it, and follow the right steps to get your washer working again.

Water Supply, Drain & Leak Error Codes

These Samsung washer error codes usually appear when the washer can’t fill with water, drain properly, or detects a possible leak. In many cases, the problem is caused by a clogged drain filter, blocked hose, low water pressure, or a loose water connection. These are some of the most common issues homeowners can check before scheduling a repair.

Door, Lock & Load Error Codes

Door and load-related error codes happen when the washer can’t safely start or continue a cycle. A door that isn’t fully closed, a faulty door latch, or an overloaded drum can all trigger these codes. Before replacing any parts, make sure the door closes securely and the laundry is evenly balanced inside the drum.

Motor, Heating & Electrical Error Codes

These error codes point to problems with the washer’s internal components, such as the motor, heating system, temperature sensor, or electronic control board. While a simple reset may clear a temporary glitch, recurring motor or electrical Samsung washer fault codes often require a more detailed inspection and should not be ignored.

Other Samsung Washer Error Codes

Some Samsung washing machine error codes are less common and may relate to software, communication, calibration, or internal sensors. Even though these errors don’t appear as often, they can still affect your washer’s performance. If an uncommon code keeps returning after basic troubleshooting, it’s usually a sign that the washer needs a professional diagnosis before the problem gets worse.

How to Reset a Samsung Washer After an Error Code

If your Samsung washer error code appears only once, a simple reset may clear it. A reset won’t fix a broken part, but it can remove temporary software glitches caused by a power interruption or a failed wash cycle. If the same Samsung washer error code comes back after resetting, the washer is still detecting a problem that needs to be fixed.

1. Turn Off the Washer

Press the Power button to turn off the washer. If it doesn’t respond, unplug it from the electrical outlet.

2. Disconnect the Power

Leave the washer unplugged for 1 to 5 minutes. This allows the control board to completely power down and reset.

3. Restore Power

Plug the washer back in or switch the circuit breaker back on if you turned it off.

4. Run a Short Test Cycle

Select a quick wash or rinse cycle and let the washer run. If no Samsung washing machine error codes appear, the issue was likely a temporary system glitch.

5. If the Error Code Returns

If the same error code comes back, don’t keep resetting the washer. The machine is detecting an active problem, such as a blocked drain, low water pressure, a faulty door lock, or a failed sensor. Check the troubleshooting steps for your specific error code before using the washer again.

Expert Tips from Kaspi Appliance Repair Technicians

At Kaspi Appliance Repair, Samsung washers are one of the brands our technicians service most often. Since 2017, we’ve helped homeowners and businesses diagnose and repair everything from simple drain and water supply issues to complex motor, control board, and sensor failures. Our experienced technicians use professional diagnostic tools to identify the exact cause of a Samsung washer error code, so repairs are based on accurate testing not guesswork.

We believe in fixing the root cause instead of just clearing the error message. Every repair is completed with quality replacement parts, honest recommendations, and clear communication, so you know exactly what’s wrong with your washer and the best way to get it running reliably again. Whether it’s a minor fix or a major repair, our goal is to provide a long-lasting solution you can trust.

Schedule Your Samsung Washer Repair with Kaspi Appliance Repair in Texas

A washer that keeps stopping in the middle of a cycle or displays the same Samsung washer error code shouldn’t disrupt your day. At Kaspi Appliance Repair, we make the repair process simple with convenient scheduling, clear communication, and experienced technicians who diagnose the problem accurately before recommending a solution. when your washer needs a minor adjustment or a more complex repair, we’re committed to providing dependable washer repair service that helps extend the life of your appliance.

We’re proud to serve homeowners and businesses across Houston, Katy, Sugar Land and Fulshear, delivering trusted Samsung washer repair backed by quality workmanship and honest service. Don’t let a small washer problem turn into a costly breakdown. Contact Kaspi Appliance Repair today to schedule your service and get your Samsung washer running smoothly again.

Frequently Asked Questions About Samsung Washer Error Codes